Building a S2 mk2 golf - S2Forum

gnutz2 · 12-12-06, 07:10 PM

Hi there everyone thought you might be intrested in a new project i`ve just started this year. It all came about when someone crashed into my nice mk2 1.8T golf syncro, which i had managed to squeeze a 12.7@113 quartermile out of. Anyway i made myself another mk2 golf syncro, which used to be a 3 door 1.3 which was the first golf i ever bought when i was about 19. Things didnt go too well with this car and i managed to demolish the golf rallye g box with an uprated cluth with only about 300 hp. So i was getting a bit tired by this point and things started ticking in my head i thought about putting the 1,8t engine on a longitudal quattro box in the golf, but i had allready sold the engine to my mate and he did`nt want to sell me it back. So then i thought F*@k it i`ll make an audi S2 based mk2.

Earlier this year i spotted an red ABY 1994 S2 avant down in Bristol with 180k on it and it was soon sitting pretty on my drive, well apart from the back end being stoved in but it was cheap. I made sure i had a few days insurance when i got it because i`ve never drove an S2 before and was a bit curious. anyway i was well impressed with the handling and the power but did smoke the brakes and the clutch, but what the hell.

I soon got to work stripping the car and selling the bits (sold like hotcakes)and got started on the project. It`s only early stages but i have mounted the front and rear subframes and have started installing the roll cage which will eventually hold the front subframe in place as i intend to space frame the front end. Anyway here`s some pics but bare in bind its eary stages

.

The last pic Is`nt my car it`s just what the cage is going to look like when it`s in.

Baz.

Corey · 12-12-06, 07:26 PM

Nice project, was it you who called last week?

robo · 12-12-06, 07:27 PM

This is Gr8 project

What you think will it be under 800 kg when finished????

Jensk · 12-12-06, 07:32 PM

man.. if something is ever going to fly, this would be it

gnutz2 · 12-12-06, 07:39 PM

Yes it is Corey. dosent matter about the con rods tho i`ve found a really cheap set. Did yuo find any prices for the other parts?

caterpillar · 12-12-06, 07:43 PM

the rear end ARE a rs2 unit or a s2 vagon unit...... amazing projeckt

blown_vr6 · 12-12-06, 07:44 PM

Great project

Wouldnt happen to be friends with Paul Horrocks would you? - know hes local and turns his hand to most things

gnutz2 · 12-12-06, 07:53 PM

Im gonna struggle to get the car under a ton, and the back end is a modified S2 avant.

Yeah i know paul, top bloke gave me some parts for other projects in the past. I`ve not been in touch with him for ages tho.

Corey · 12-12-06, 08:12 PM

Quote:

Originally Posted by gnutz2

Yes it is Corey. dosent matter about the con rods tho i`ve found a really cheap set. Did yuo find any prices for the other parts?

I did and will delve into the mess I call a desk tomorrow and give you a call.

gnutz2 · 12-12-06, 08:23 PM

Quote:

Originally Posted by Corey

I did and will delve into the mess I call a desk tomorrow and give you a call.

If you cant find my number send me a pm.

newsh · 12-12-06, 09:48 PM

You are a maniac! Well done!

BRY · 12-12-06, 10:25 PM

Nice goin Baz, you even managed to use photobucket.

gnutz2 · 12-12-06, 11:12 PM

Cheers, yeah the pics went on ok after i resized them i`ll keep them coming. Should have the cage fitted soon, i decided to get a weld in job from customcages to save a bit of time (Â£565+vat). they look the business

**Rusty** · 13-12-06, 07:03 AM

Nice work

That's rather mental!

**Fat Audi 80** · 13-12-06, 07:11 AM

You sir are an absolute nutter. Are you going to keep the Avus on there as a clue

Please keep us updated, I love it!

Oh and

Cheers,

Steve.

12-12-06, 07:10 PM	#1
gnutz2 S2Forum Maniac Join Date: Aug 2006 Location: near York Posts: 533	Building a S2 mk2 golf Hi there everyone thought you might be intrested in a new project i`ve just started this year. It all came about when someone crashed into my nice mk2 1.8T golf syncro, which i had managed to squeeze a 12.7@113 quartermile out of. Anyway i made myself another mk2 golf syncro, which used to be a 3 door 1.3 which was the first golf i ever bought when i was about 19. Things didnt go too well with this car and i managed to demolish the golf rallye g box with an uprated cluth with only about 300 hp. So i was getting a bit tired by this point and things started ticking in my head i thought about putting the 1,8t engine on a longitudal quattro box in the golf, but i had allready sold the engine to my mate and he did`nt want to sell me it back. So then i thought F*@k it i`ll make an audi S2 based mk2. Earlier this year i spotted an red ABY 1994 S2 avant down in Bristol with 180k on it and it was soon sitting pretty on my drive, well apart from the back end being stoved in but it was cheap. I made sure i had a few days insurance when i got it because i`ve never drove an S2 before and was a bit curious. anyway i was well impressed with the handling and the power but did smoke the brakes and the clutch, but what the hell. I soon got to work stripping the car and selling the bits (sold like hotcakes)and got started on the project. It`s only early stages but i have mounted the front and rear subframes and have started installing the roll cage which will eventually hold the front subframe in place as i intend to space frame the front end. Anyway here`s some pics but bare in bind its eary stages . The last pic Is`nt my car it`s just what the cage is going to look like when it`s in. Baz.
	Post Tools

12-12-06, 07:26 PM	#2
Corey S2Forum Fiend Join Date: Sep 2003 Location: Newark Posts: 2,813	Nice project, was it you who called last week? __________________ Corey 01636 822288
	Post Tools

12-12-06, 07:27 PM	#3
robo S2Forum Extremist Join Date: Aug 2004 Location: uxbridge Posts: 1,275	This is Gr8 project What you think will it be under 800 kg when finished???? __________________ _________ Rob
	Post Tools

12-12-06, 07:32 PM	#4
Jensk S2Forum Buff Join Date: Sep 2006 Location: Molde, Norway Posts: 40	man.. if something is ever going to fly, this would be it __________________ '92 Audi S4
	Post Tools

12-12-06, 07:39 PM	#5
gnutz2 S2Forum Maniac Join Date: Aug 2006 Location: near York Posts: 533	Yes it is Corey. dosent matter about the con rods tho i`ve found a really cheap set. Did yuo find any prices for the other parts?
	Post Tools

12-12-06, 07:43 PM	#6
caterpillar S2Forum Extremist Join Date: Jun 2004 Location: NORWAY Posts: 1,315	the rear end ARE a rs2 unit or a s2 vagon unit...... amazing projeckt
	Post Tools

12-12-06, 07:44 PM	#7
blown_vr6 S2Forum Addict Join Date: Apr 2005 Location: Sussssssssssssssssex ya know! Posts: 413	Great project Wouldnt happen to be friends with Paul Horrocks would you? - know hes local and turns his hand to most things __________________ 'If you ain't broke it you ain't trying hard enough' Oh sh*t i broke it 94 S2 Homefried Decatted Slipperwagon,QRS Top Mounts,Ally Subframe bushes,Poly ARB & Wishbone bushes,RS2 ARB's,Koni & H&R's,Cupra Brembo's and 312mm discs
	Post Tools

12-12-06, 07:53 PM	#8
gnutz2 S2Forum Maniac Join Date: Aug 2006 Location: near York Posts: 533	Im gonna struggle to get the car under a ton, and the back end is a modified S2 avant. Yeah i know paul, top bloke gave me some parts for other projects in the past. I`ve not been in touch with him for ages tho.
	Post Tools

12-12-06, 09:48 PM	#11
newsh S2Forum Zealot Join Date: Aug 2003 Location: Dorking, Surrey Posts: 5,185	You are a maniac! Well done! __________________ John Click here for my 3B S2 to RS2 to GT3071 project thread. Boost is the new rock and roll!
	Post Tools

12-12-06, 10:25 PM	#12
BRY S2Forum Possessed Join Date: Nov 2004 Posts: 3,585	Nice goin Baz, you even managed to use photobucket. __________________ Rocking Horse Poo and The Dangerous Brothers + The Skinny The Quattro Quartet Kingdoms are run by Kings, Dictatorships are run by Dictators, England must be a Country.
	Post Tools

12-12-06, 11:12 PM	#13
gnutz2 S2Forum Maniac Join Date: Aug 2006 Location: near York Posts: 533	Cheers, yeah the pics went on ok after i resized them i`ll keep them coming. Should have the cage fitted soon, i decided to get a weld in job from customcages to save a bit of time (Â£565+vat). they look the business
	Post Tools

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode